REMOVAL AND INSTALLATION


caution
  • As for vehicles with headlamp auto levelling system, disconnect the height sensor from the lower arm before operation to prevent damages to the height sensor (Refer to GROUP 54A - Height Sensor ).
  • The part indicated by * is the bolt/nut with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from the bearing and thread surfaces, and tighten it to the specified torque.
Pre-removal operation
  • Front height sensor removal (Refer to GROUP 54A - Height sensor .)

Post-installation operation
  • Front height sensor installation (Refer to GROUP 54A - Height sensor .)
    Front wheel alignment check and adjustment (Refer to .)





Removal steps


1.
Wheel speed sensor clamp (strut side)


2.
Brake hose bracket


3.
Stabilizer link joining


4.
Knuckle and strut connection


5.
Strut nut


6.
Strut assembly