TRAILING ARM BUSHING REPLACEMENT


caution The trailing arm bushing can be replaced only once. If the bushing is replaced multiple times, the drawing force of bushing may become reduced.

1.Use the following special tools to remove the trailing arm bushing:

  • Arm bushing remover and installer (MB992121)
  • Arm bushing base (MB992125)

2.Determine the installation direction and the installation position of the trailing arm bushing.
(1) Install so that the protruding side of the trailing arm bushing inner pipe faces inside the body.
(2) Position the trailing arm bushing inner space as shown in the figure.

3.Use the following special tools to press-fit the trailing arm bushing up to the position shown in the figure:

  • Arm bushing remover and installer (MB992121)
  • Arm bushing base (MB992125)
  • Base spacer (MB992175)