SERVICE SPECIFICATIONS


Item
Standard value
Limit value
Brake pedal height mm
221.8 - 227.8
-
Dimension from the brake booster stud bolt end to the clevis hole center mm
78 ± 2.2
-
Brake pedal play mm
3 - 8
-
Pedal-to-floor clearance when brake pedal is depressed mm
[Pedal depression force: approx. 500 N]
80 or more
-
Distance from the pedal pad surface to the level surface (mm)
L.H. drive vehicles
242 - 246
-
R.H. drive vehicles
248 - 252
-
Fluid pressure generated by brake booster non-servo effect test kPa
Pedal depression force: 100 N
200 or more
-
Pedal depression force: 300 N
1,800 or more
-
Fluid pressure generated by brake booster servo effect test kPa
Pedal depression force: 100 N
6,050 - 7,950
-
Pedal depression force: 300 N
10,720 or more
-
Front disc brake
Pad thickness mm
10.0
2.0
Brake disc thickness mm
24.0
22.4
Brake disc runout mm
-
0.04
Brake drag force N
68 or less
-
Rear disc brake
Pad thickness mm
10.0
2.0
Brake disc thickness mm
10.0
8.4
Brake disc runout mm
-
0.04
Brake drag force N
68 or less
-
Wheel bearing looseness mm
-
0.05
Brake pedal distortion mm
252 ± 2
-