SPECIAL TOOLS


Tool
Number
Name
Use


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III measure adapter
  6. M.U.T.-III trigger harness
ABS check (Diagnosis code display, service data display and calibration by M.U.T.-III )
caution For vehicles with CAN communication, use the M.U.T.-III main harness A to send the simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.


MB991974
ABS check harness
Voltage inspection at ABS-ECU terminals


MB991348
Test harness set
G and yaw rate sensor check


MB992006
Extra fine probe
Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.