DATA LIST REFERENCE TABLE


The following items can be read by the M.U.T.-III from the ABS-ECU input data.
The following items of ECU input data can be read using M.U.T.-III.
1.The system is normal.
Item No.
 Check item
 Check conditions
 Normal conditions
01
 FL wheel speed sensor
 Perform a test run of the vehicle.
 The speedometer display and the M.U.T.-III display almost agree with each other.
02
 FR wheel speed sensor
03
 RL wheel speed sensor
04
 RR wheel speed sensor
05
 Power supply voltage
 10 to 18 V
07
 Brake switch (input)
 The brake pedal is released.
 OFF
The brake pedal is depressed.
 ON
-
 Undefined
09
 G sensor (+: deceleration, -: acceleration)
 Vehicle stopped (level)
 -0.11 to 0.11 G
Running
 -1 to 1 G
14
 Brake switch (Stop light switch)
 The brake pedal is depressed.
 ON
The brake pedal is released.
 OFF
87
 Ignition switch (input)
 Ignition switch is "ON" position
 ON
Ignition switch is "START" position
 Start
88
 Vehicle speed
 Perform a test run of the vehicle.
 The speedometer display and the M.U.T.-III display almost agree with each other.
92
 Tire circumference (memorized)
 -
 0 mm
-
 2124 mm or 2155 mm
105
 Power supply voltage (input)
 10 to 18 V
2.System shutdown by ECU
While ABS-ECU is disabled by the diagnostic function, the M.U.T.-III displayed data is different from the actual measurement.