ABS WARNING LAMP AND BRAKE WARNING LAMP CHECK


Check that ABS and brake warning lamps illuminate as follows.
note The EBD warning lamp is also used as the brake warning lamp.

1.When the ignition switch is turned to the ON position, ABS and brake warning lamps illuminate.
2.The ABS and brake warning lamps illuminate for three seconds*1 and then turn OFF*2.
3.Otherwise, check the diagnosis code.
note
  • *1: The ABS warning lamp may stay ON until the vehicle speed reaches 10 km/h. As far as ASC-ECU stores any diagnosis code related to the wheel speed sensor malfunction or the motor malfunction as past trouble, ASC-ECU continues illuminating the ASC warning lamp until it verifies that the malfunction for that code is resolved (startup check).
  • *2: The lamp does not turn OFF when the parking brake is applied or the brake fluid level is lowered.