|
DIAGNOSIS CODE SET CONDITIONS |
This diagnosis code is set when the brake fluid is not filled in the hydraulic unit. |
PROBABLE CAUSES |
|
DIAGNOSIS PROCEDURE |
STEP 1. M.U.T.-III CAN bus diagnosis |
Use M.U.T.-III to diagnose the CAN bus lines. |
Q.
Is the check result normal?
|
Go to Step 2. |
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnosis table ).
On completion, go to Step 2. |
|
STEP 2. Check whether the diagnosis code is reset. |
Q.
Is the diagnosis code No. C1395 set?
|
Replace the ABS-ECU. |
|
This diagnosis is complete. |
|