)
Standard value: 2.8 mm
Limit: 1.0 mm
2.If the thickness is less than the limit value, replace the right and left shoe and lining assemblies as a set.
BRAKE LINING THICKNESS CHECK |
|
1.Measure the lining thickness at the most worn area. Standard value: 2.8 mm Limit: 1.0 mm 2.If the thickness is less than the limit value, replace the right and left shoe and lining assemblies as a set. |
BRAKE DRUM INSIDE DIAMETER CHECK |
) |
1.Measure the inside diameter of the brake drum at two positions or more. Standard value: 190.0 mm Limit: 191.0 mm 2.If the inside diameter is more than limit value or if there is excessive wear, replace the brake disc. |