|
|
1.Park the vehicle on a level surface. Start the engine, and turn the steering wheel several times with the vehicle stationary to increase the fluid temperature to 50 to 60°C.
|
|
|
2.With the engine running, turn the steering wheel fully in both directions several times.
|
|
|
3.Check that no bubbles or milky conditions are found in the oil reservoir.
|
|
4.Check that the fluid level is changed when the engine is stopped. When the fluid level difference between two conditions (engine running and engine stopped) is 5 mm or more, bleed the power steering system.
|
)