POWER STEERING FLUID REPLACEMENT

1.Raise the front wheels using a jack, and support with a rigid rack.

2.Disconnect the return hose, and catch the fluid into a container.
3.Disconnect the starter connector
(Refer to GROUP 16 - Starter System

).
4.Crank the engine with the starter motor intermittently several times and then turn the steering wheel fully in both directions repeatedly to drain off the fluid.
5.Connect the return hose securely, and fix with clips.
6.

caution

Do not use ATF-SP II M and ATF-SP III.

Fill the specified fluid to the level between MAX and MIN marks of the oil reservoir, and bleed the power steering system.
Fluid: Mitsubishi genuine Dia-Queen Power Steering Fluid