REMOVAL AND INSTALLATION


Pre-removal operation
  • Power Steering Fluid Draining (Refer to ).
  • Engine Cover Removal (Refer to GROUP 11A - Engine assembly ).

 Post-installation operation
  • Engine Cover Installation (Refer to GROUP 11A - Engine assembly ).
  • Power Steering Fluid Refilling and Bleeding (Refer to ).
  • Drive Belt Tension Adjustment (Refer to GROUP 11A,On-vehicle service - Drive Belt Tension Adjustment ).





Removal steps


1.
 Alternator and Others Belt (Refer to GROUP 11A - Engine assembly ).

>>A<<
 2.
 Suction hose connection


3.
 Eye bolt


4.
 Gasket


5.
 Pressure hose connection


6.
 Oil pump assembly

INSTALLATION SERVICE POINTS

>>A<< SUCTION HOSE CONNECTION

Align the suction hose marking (green) within the area shown in the figure and connect the suction hose.