)
| Disassembly steps |
|||
<<A>> |
>>A<< |
1. |
Steering locking bolt |
| >>A<< |
2. |
Steering lock assembly |
|
| 3. |
Steering column shaft assembly |
|
|
DISASSEMBLY SERVICE POINT |
<<A>> STEERING LOCK BOLT REMOVAL |
) |
1.Use a drill to make a hole just deeply enough for the tap to stand on the steering lock bolt. 2.Use a left-hand thread tap to remove the steering lock bolt. |
ASSEMBLY SERVICE POINT |
>>A<< STEERING LOCK ASSEMBLY INSTALLATION |
| 1.When installing the steering lock assembly to the steering column shaft assembly, temporarily assemble the steering lock assembly while aligning it with the boss on the column. |
) |
2.Make sure that the steering lock operates normally, and then tighten the steering lock bolt until its head is broken off. |