REMOVAL AND INSTALLATION



Pre-removal and post-installation operation
  • Rear wiper blade and arm assembly removal and installation (Refer to GROUP 51 - Rear Wiper and Washer .)
  • Tailgate spoiler assembly removal and installation (Refer to GROUP 51 - Tailgate Spoiler .)
  • Tailgate trim removal and installation (Refer to GROUP 52A - Tailgate Trim .)






Removal steps


·
Harness connector
<<A>>
>>B<<
1.
Tailgate window glass

>>A<<
2.
Fastener

>>A<<
3.
Glass stopper

>>A<<
4.
Tailgate dam upper

>>A<<
5.
Tailgate dam side

>>A<<
6.
Tailgate dam lower

REMOVAL SERVICE POINTS



<<A>> TAILGATE WINDOW GLASS REMOVAL


Remove the tailgate window glass by the same procedure as for the windshield (Refer to ).
note Use a piano wire to remove the tailgate window glass.

INSTALLATION SERVICE POINTS



>>A<< TAILGATE DAM LOWER/TAILGATE DAM SIDE/TAILGATE DAM UPPER/GLASS STOPER/FASTENER INSTALLATION


1.
caution Before the next operation, leave the decreased parts for 3 minutes or more to dry. Do not touch the degreased parts.
Use white gasoline to degrease the inside circumference of the tailgate window glass and the tailgate flanges.
2.

Install the tailgate dam lower, tailgate dam side, tailgate dam upper, glass stopper, and fastener to the specified position.

3.Install the fasteners to the specified positions on the tailgate flange.

>>B<< TAILGATE WINDOW GLASS ASSEMBLY INSTALLATION


1.Apply the primer and adhesive.
2.Install the tailgate window glass by the same procedure as for the windshield (refer to ).