REMOVAL AND INSTALLATION


Post-installation operation<Roof lid glass assembly and sunroof assembly>

  • Sunroof leakage check (Refer to .)
  • Sunroof alignment (Refer to .)
  • Learning procedures for sunroof fully closed position (Refer to .)




Sunroof switch removal


·
 Front room lamp assembly (Refer to GROUP 52A - Headlining .)



Roof lid glass assembly removal


1.
 Roof lid glass assembly



Sunroof motor assembly removal steps


·
 Front room lamp bracket (Refer to GROUP 52A - Headlining .)


2.
 Sunroof motor assembly



Sunroof assembly removal steps


·
 Front energy absorber roof bracket <Vehicles with curtain air bag> (Refer to GROUP 52A - Headlining .)


·
 Bracket <Vehicles with rear displayr>(Refer to GROUP 54A - Rear Display .)


3.
 Drain pipe connection
<<A>>
4.
 Sunroof assembly



Drain pipe removal steps


·
 Headlining (Refer to GROUP 52A - Headlining .)


·
 Splash shield front (Refer to .)

>>A<<
 5.
 Front drain pipe


·
 Splash shield rear (rear bumper side)(Refer to .)

>>A<<
 6.
 Rear drain pipe

REMOVAL SERVICE POINT

<<A>> SUNROOF ASSEMBLY REMOVAL

Use a pair of long nose pliers or the like to remove the sunroof assembly while turning it in the direction shown in the figure.

INSTALLATION SERVICE POINT

>>A<< FRONT DRAIN PIPE/REAR DRAIN PIPE INSTALLATION

Install the grommet, and adjust the drain pipe projection as shown.