Code No.B2352 Antenna fail

DIAGNOSIS FUNCTION

WCM sets the diagnosis code No. B2352 when open or short circuit to the earth in the antenna is detected.

JUDGEMENT CRITERIA

When the ignition switch is turned ON, WCM transmits signal to the antenna. When the antenna is found faulty, WCM determines that the abnormality is present.

PROBABLE CAUSES

Malfunction of WCM (Open circuit in antenna)

DIAGNOSIS PROCEDURE

Diagnosis code recheck

Recheck if the diagnosis code is set.

(1)Turn the ignition switch from the LOCK (OFF) position to the ON position.

(2)Check if the diagnosis code is set.

Q. Is the diagnosis code set?

	Replace WCM and register the ID codes (Refer to ).

	The diagnosis is complete.