DIAGNOSIS CODE CHART <POWER WINDOW>


caution On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
Diagnosis code No.
Diagnostic item
Reference page
L0730
P/W (DR) SW pulse1 disconnection

L0732
P/W (DR) SW pulse2 disconnection

L0734
P/W (DR) Above window position

L0736
P/W (DR) Sensor fail (ground)

L0740
P/W (DR) 3 times jumm - protection

L0746
P/W (DR) Parameter read fail

L0750
P/W (DR) Position read fail
L0830
P/W (AS) SW pulse1 disconnection

L0832
P/W (AS) SW pulse2 disconnection

L0834
P/W (AS) Above window position

L0836
P/W (AS) Sensor fail (ground)

L0840
P/W (AS) 3 times jumm - protection

L0846
P/W (AS) Parameter read fail

L0850
P/W (AS) Position read fail
L0930
P/W (RL) SW pulse1 disconnection

L0932
P/W (RL) SW pulse2 disconnection

L0934
P/W (RL) Above window position

L0936
P/W (RL) Sensor fail (ground)

L0940
P/W (RL) 3 times jumm - protection

L0946
P/W (RL) Parameter read fail

L0950
P/W (RL) Position read fail
L0A30
P/W (RR) SW pulse1 disconnection

L0A32
P/W (RR) SW pulse2 disconnection

L0A34
P/W (RR) Above window position

L0A36
P/W (RR) Sensor fail (ground)

L0A40
P/W (RR) 3 times jumm - protection

L0A46
P/W (RR) Parameter read fail

L0A50
P/W (RR) Position read fail
note P/W: Abbreviation of power Window