Before replacing the ECU,
ensure that the input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the earth fault of the front power window motor (passenge’s side) sensor power
supply is detected, front power window sub switch sets the diagnosis trouble code No. L0836
PROBABLE CAUSES
Malfunction of the front power window motor (passenger’s
side)
Malfunction of the front power window sub switch
Damaged wiring harness and connectors
DIAGNOSTIC PROCEDURE
STEP 1. Connector check: E-05 front power window sub switch
connector, E-03 front power window motor (passenger’s side) connector
Q.
Is the check result normal?
Go to Step 2.
Repair the defective connector.
STEP 2. Check of the wiring harness between the E-05 front power window
sub switch connector terminal No. 3 and the E-03 front power window motor (passenger’s
side) connector terminal No. 6
Check the power supply line for open circuit and short circuit.
Q.
Is the check result normal?
Go to Step 3.
Repair the wiring harness.
STEP 3. Diagnosis code recheck
Replace the front power window motor (passenger’s side). Recheck if the diagnosis
code is set.
(1)Erase the diagnosis code.
(2)Turn the ignition switch from the LOCK (OFF) position to the ON position.