DISASSEMBLY AND REASSEMBLY



Post-installation operationOperation check of the keyless operation key




Disassembly steps


1.
Emergency key
<<A>>

2.
Upper cover
<<A>>
>>A<<
3.
Battery
<<A>>

4.
Lower cover

DISASSEMBLY SERVICE POINT



<<A>> UPPER COVER/BATTERY/LOWER COVER REMOVAL


caution Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.

Place a flat-tipped screwdriver wrapped with protective tape as shown in the figure, and lever the keyless operation key to remove.

REASSEMBLY SERVICE POINT



>>A<< BATTERY INSTALLATION


caution Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.

Install a new battery with the positive side facing toward the lower cover.
Replacement battery: Coin-type lithium battery CR2032