REMOVAL AND INSTALLATION


1.
 Front scuff plate


2.
 Cowl side trim


3.
 Rear scuff plate


4.
 Front door opening trim


5.
 Rear door opening trim


6.
 Front pillar trim


7.
 Centre pillar trim lower cover


·
 Seat belt pre-tensioner connector


8.
 Centre pillar trim, lower
<<A>>
9.
 Centre pillar trim upper cap


10.
 Centre pillar trim, upper


11.
 Rear end trim



Quarter trim lower and quarter trim upper removal steps


12.
 Maintenance lid


13.
 Cargo hook assembly


14.
 Utility bar cover


15.
 Utility bar


16
 Jack lid assembly


17.
 Tumble switch


18
 Quarter trim, lower


19.
 Sash guide cover


20.
 Third seat belt anchor bolt
<<A>>
21.
 Quarter trim upper cap


22.
 Quarter trim, upper
note For the vehicles with curtain air bag, install the front pillar trim and quarter trim upper provided for curtain air bag.

CLIP AND CLAW POSITIONS




note Each number in the illustration indicates a part number.

REMOVAL SERVICE POINTS

<<A>> CENTRE PILLAR TRIM UPPER/QUARTER TRIM UPPER CAP REMOVAL

Remove the opening trim. Remove the trim cap by inserting the special tool ornament remover (MB990784) between the trim and body as shown in the illustration.