REMOVAL AND INSTALLATION


caution For the removal of the seat belt with pre-tensioner, Refer to GROUP 52B - Service Precautions (Refer to ) and Seat Belt with Pre-tensioner (Refer to ).




Outer seat belt removal steps


·
Front scuff plate, scuff plate rear, centre pillar trim lower (Refer to ).
<<A>>

1.
Centre pillar trim upper cap


2.
Centre pillar trim upper (Refer to ).


3.
Outer seat belt


4.
Adjuster seat belt anchor



Inner seat belt removal steps


5.
Seat belt switch connector


6.
Inner seat belt

REMOVAL SERVICE POINT



<<A>> CENTRE PILLAR TRIM UPPER CAP REMOVAL



Remove the opening trim. Remove the trim cap by inserting the special tool ornament remover (MB990784) between the trim and body as shown in the illustration.