INSPECTION




PASSENGER’S AIR BAG CUT OFF SWITCH CONTINUITY CHECK



Switch position
Tester connection
Specified condition
ON position
1 - 4
No continuity
OFF position
1 - 4
Continuity
(Less than 2 Ω)

PASSENGER’S AIR BAG OFF INDICATOR LAMP


1.Remove the centre panel.

2.Connect the positive battery terminal with the centre panel connector terminal No. 8. Then, check if the passenger's air bag OFF indicator lamp is illuminated when the negative battery terminal and the centre panel connector terminal No. 11 are connected.
3.When the passenger's air bag OFF indicator lamp is illuminated, the result is judged as good.