SERVICE SPECIFICATIONS


Item
Standard value
Limit
Headlamp aiming
Low-beam
Vertical direction
36 mm (0.69°) below horizontal (H)
Not within 21 mm (0.4°) below horizontal (H)
Horizontal direction
15° sloping section intersects the vertical line (V)
±26 mm (±0.5°) from the vertical line (V)
High-beam
Vertical direction
Intersecting position of vertical line (V) and horizontal line (H)
26 mm (0.5°) or less below the horizontal (H)
Horizontal direction
Intersecting position of vertical line (V) and horizontal line (H)
±26 mm (±0.5°) from the vertical line (V)
Headlamp luminous intensity measurement cd
(When a screen is set 25 m ahead of the vehicle)
-
30,000 cd or more

PRECAUTIONS ON HOW TO USE THE HEADLAMP ASSEMBLY


Be careful with the following items as resin lenses are used in the headlamp assembly.