DIAGNOSIS CODE CHART


caution On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
Diagnosis code No.
Diagnostic item
Reference page
B16A2
Blown turn-signal lamp (LH) bulb

B16A3
Turn-signal lamp (LH) short circuit

B16A4
Blown turn-signal lamp (RH) bulb

B16A5
Turn-signal lamp (RH) short circuit