SPECIAL TOOLS


Tool
Number
Name
Application


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III measure adapter
  6. M.U.T.-III trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Combination meter (incorporating the meter-ECU) check (Diagnosis code, service data, actuator test)


MB991499
Measurement probe
Measurements of voltage and resistance value
note M.U.T.-II attached probe (Commercial probes can also be used.)


MB991223

  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222
Harness set

  1. Check harness
  2. LED harness
  3. LED harness adapter
  4. Probe
Continuity check and voltage measurement at harness wire or connector

  1. For checking connector pin contact pressure
  2. For checking power supply circuit
  3. For checking power supply circuit
  4. For connecting a locally sourced tester


MB992006
Extra fine probe
Continuity check and voltage measurement at harness wire or connector