Display content
|
Factor
|
Action procedure
|
|
Displayed with the sounding of buzzer when the driver’s
door is opened with the ignition switch at the LOCK (OFF) position and the lighting switch at
the tail or head position.
|
If the lighting monitor warning buzzer is not being sounded, perform
the troubleshooting for the lighting monitor warning buzzer. Refer to .
|
|
Displayed when a malfunction occurs to KOS. Refer to GROUP 42B - Diagnosis
.
- Displayed when an IG knob return failure occurs or
the door lock does not operate.
- Displayed when the KOS key battery is running low.
- Displayed if carrying a KOS key with different ID code or the KOS key is outside
the operative range.
- Displayed when the KOS key removal monitoring function or KOS key confinement prevention
function is in operation.
- Displayed when the door ajar prevention function is in operation.
- Displayed when there is a malfunction to KOS.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the KOS. Refer to GROUP 42B - Diagnosis
code chart .
|
|
- Displayed when the brake fluid amount
is insufficient or a malfunction occurs to the brake device.
- Displayed if vehicle is driven with the parking brake engaged.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, take the following measures for each displayed item.
- Check the brake fluid or brake device.
- Check the parking brake.
|
|
Displayed when a malfunction occurs to the anti-skid braking system
(ABS).
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the ABS. Refer to GROUP 35B - Trouble
symptom chart .
|
|
If any of the doors or tailgate is not closed completely, the location
of the ajar door is displayed with the sounding of buzzer.
|
If the door ajar warning buzzer does not sound, perform the troubleshooting
for the door ajar warning buzzer. Refer to .
|
|
Displayed when overheated.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the engine. Refer to GROUP 13A - Trouble
symptom chart .
|
|
Displayed when the ignition switch is turned ON without the driver’s seat
belt fastened.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the seat belt reminder warning lamp.
Refer to .
|
|
Displayed when the remaining fuel amount is small.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, check the combination meter diagnosis code. Refer to .
|
|
Displayed when there is a malfunction to the engine oil circulation
system.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, check the engine oil amount.
|
|
Displayed when there is a malfunction to the charging system.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, check the battery.
|
|
Displayed when there is a malfunction to the SRS air bag or to the
pre-tensioner mechanism.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the SRS air bag/pre-tensioner mechanism
warning lamp. Refer to GROUP 52B - Trouble symptom chart .
|
|
Displayed when there is a malfunction to the headlamp automatic levelling
function.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the headlamp automatic levelling
function. Refer to .
|
|
Displayed when there is a malfunction to the ASC.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the ASC. Refer to GROUP 35C - Trouble
symptom chart .
|
|
- Displayed when there is a malfunction
to the electronically-controlled 4WD system or multi-select 4WD.
- Displayed when there is a malfunction to the electronically-controlled 4WD differential
or when the multi-select 4WD system temperature is high.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the electronically-controlled 4WD
system. Refer to GROUP 27C - Trouble symptom chart .
|
|
Displayed when there is a malfunction to the engine control device.
|
If the warning screen is not displayed normally or if the screen
continues to be displayed, perform the troubleshooting for the engine. Refer to GROUP 13A - Trouble
symptom chart .
|
|
Displayed with the sounding of buzzer when the ambient temperature
is 0°C or less.
|
If the freeze warning buzzer does not sound with the ambient temperature
of 0°C or less, perform the troubleshooting for the freeze warning buzzer. Refer to .
|