SERVICE REMINDER FUNCTION SET



HOW TO SET BY OPERATING M.U.T.-III


caution
  • If the combination meter needs to be replaced, the current driving distance and elapsed days must be entered into the meter after the replacement in order to be used for service reminder function. Therefore, read "Integrated mileage for reminder," "Integrated days for reminder," "Mileage until Extra reminder," "Months until Extra reminder," and "Current schedule" from the meter before the replacement using the special function of M.U.T.-III, and note them. If "Integrated mileage for reminder" or "Integrated days for reminder" cannot be read from the meter using M.U.T.-III, use the following method.

    1. As for the driving distance for check warning, use the driving distance displayed on the multi information display.
    2. As for the elapsed days for check warning, calculate the number of elapsed days from the delivery date to the customer (service reminder function start date) and current date.
  • After the service reminder function has started, when the elapsed days for check warning is reset for the vehicle whose battery is removed for a long period (15 days or more), calculate the elapsed days from the delivery date to the customer (service reminder function start date) and the current date, and then input it.
Using M.U.T.-III, the following service reminder functions can be set. Before setting, check the current status (schedule, elapsed distance and elapsed days).

  1. Reminder reset (Indicator off)
  2. Next schedule reminder cancel
  3. Extra service reminder setting
  4. Extra reminder cancel
  5. Periodic reminder schedule set
  6. Integrated value adjustment
  7. Optional INT schedule setting

HOW TO OPERATE M.U.T.-III


caution Before setting, if the combination meter does not start measuring the elapsed time, turn the ignition switch to the ON position while pressing the reset switch to start a measurement.
1.Connect M.U.T.-III to the diagnosis connector (16 pin).
2.Start the M.U.T.-III system on the PC and turn the ignition switch to the "ON" position.
3.Select "Meter" on the "System Select" screen, and press the "OK" button.
4.Select "Special Function" on the next screen.
5.Select "Service Reminder" on the "Special function" screen.

6.Select the function to be executed from "Function List."

  • 1 Reminder reset (Indicator off) (Refer to .)
  • 2 Next schedule reminder cancel (Refer to .)
  • 3 Extra service reminder setting (Refer to .)
  • 4 Extra reminder cancel (Refer to .)
  • 5 Periodic reminder schedule set (Refer to .)
  • 6 Integrated value adjustment (Refer to .)
  • 7 Optional INT schedule setting (Refer to .)

1. Reminder reset (Indicator off)


The service reminder warning indicator which is currently output can be cancelled.
note In addition to the operation of M.U.T.-III, the service reminder warning indicator can be cancelled by operating the tripmeter reset button on the combination meter. Refer to .

1.On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)."
note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 km" and "0 month."
2.Press the "OK" button.

3.The current warning indicator is cancelled, and the next warning period is displayed.
note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "15000 km" and "12 month."

2. Next schedule reminder cancel


caution
  • The warning period can be cancelled up to twice consecutively. (The warning period of the next time and the following time can be cancelled.)
  • If "2 Next schedule reminder cancel" is executed twice consecutively by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.
The next warning period is cancelled, and its following warning period can be set.

1.On the "Service Reminder" screen, select "2 Next schedule reminder cancel."
note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "1000 km" and "1 month."
2.Press the "OK" button.

3.The next warning period is reset, and its following warning period is set.
note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is changed to "16000 km" and "13 month."

3. Extra service reminder setting


In addition to the current warning period, the temporary service reminder warning period can be set.

1.On the "Service Reminder" screen, select "3 Extra service reminder setting."
note The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has not been set.

2.Set the temporary warning period (distance or month) of the "Set value."
note Either input of distance or month can execute the setting.
3.Press the "OK" button.

4.The temporary warning period is set.
note The screen indicates that "2 month" has been added to the temporary warning period (No. 5 in the data list). (The distance of No. 4 in the data list has not been set.)

4. Extra reminder cancel


The temporary service reminder warning period which has been set can be cancelled.

1.On the "Service Reminder" screen, select "4 Extra reminder cancel."
note The screen indicates that "3000 km" and "2 month" have been set to the temporary warning period (Nos. 4 and 5 in the data list).
2.Press the "OK" button.

3.The temporary warning period is cancelled.
note The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has been cancelled.

5. Periodic reminder schedule set


The service reminder schedule can be changed.
note In addition to the operation of M.U.T.-III, the schedule can be changed by operating the tripmeter reset button on the combination meter. Refer to .

1.On the "Service Reminder" screen, select "5 Periodic reminder schedule set."
note The screen indicates that the current schedule (No. 7 in the data list) has been set to "EU 1."

2.Set the schedule to be changed from "Set value."
3.Press the "OK" button.

4.The schedule is changed.
note The screen indicates that the current schedule (No. 7 in the data list) has been changed to "EU 2."

6. Integrated value adjustment


At the combination meter replacement or for the vehicle with its battery being removed for a long period (15 days or more), this adjustment is used to reset the mileage and elapsed days for check warning.

1.On the "Service Reminder" screen, select "6 Integrated value adjustment."
note The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) are "26 km" and "0 day."

2.To "Set value," input the mileage and elapsed days to be reset.
note Always input both the mileage and elapsed days.
3.Press the "OK" button.

4.The mileage and elapsed days are changed. The combination meter automatically recalculates the distance and days to the nearest next check from the settings of mileage and elapsed days for check warning, and then displays them in "Data List."
note
  • The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) have been changed to "100 km" and "30 day."
  • Set the elapsed days for check warning to "0 day" by the above resetting method, thereby the timer is reset indirectly.

7. Optional INT schedule setting


caution If the current schedule is set to the "optional interval" by executing "5. Periodic inspection schedule setting," the "set value" cannot be input. Therefore, set it to the schedule other than the "optional interval" once, and then execute "7. Optional interval schedule setting."
In addition to the existing schedule, the optional service reminder schedule can be set.

1.On the "Service Reminder" screen, select "7 Optional INT schedule setting."
note The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.

2.Set the optional schedule (distance or month) of the "Set value."
note Either input of distance or month can execute the setting.
3.Press the "OK" button.

4.The optional schedule is set. The set schedule becomes effective by executing "5 Periodic reminder schedule set" and setting the schedule to "Optional INT."
note The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set.)

Relationship between the elapsed months and the elapsed days which are used by the service reminder function


Number of months
Number of days
Number of months
Number of days
Number of months
Number of days
Number of months
Number of days
1
30 - 60
13
396 - 425
25
761 - 790
37
1 126 - 1 156
2
61 - 90
14
426 - 456
26
791 - 821
38
1 157 - 1 186
3
91 - 121
15
457 - 486
27
822 - 851
39
1 187 - 1 217
4
122 - 151
16
487 - 516
28
852 - 882
40
1 218 - 1 247
5
152 - 182
17
517 - 547
29
883 - 912
41
1 248 - 1 277
6
183 - 212
18
548 - 577
30
913 - 943
42
1 278 - 1 308
7
213 - 243
19
578 - 608
31
944 - 973
43
1 309 - 1 338
8
244 - 273
20
609 - 638
32
974 - 1 003
44
1 339 - 1 369
9
274 - 303
21
639 - 669
33
1 004 - 1 034
45
1 370 - 1 399
10
304 - 334
22
670 - 699
34
1 035 - 1 064
46
1 400 - 1 430
11
335 - 364
23
700 - 730
35
1 065 - 1 095
47
1 431 - 1 460
12
365 - 395
24
731 - 760
36
1 096 - 1 125
48
1 461 - 1 491
note
  • When the number of elapsed days is 0 to 29, the number of elapsed months is 0.
  • The combination meter performs calculation using 365.25 days for one year and 30.4375 days for one month.

HOW TO SET BY SPECIAL OPERATION OF SWITCH


By operating the tripmeter reset button of the combination meter, the service reminder warning cancellation and the schedule setting can be performed.

HOW TO CANCEL THE SERVICE REMINDER WARNING


1.Turn the ignition switch to the "OFF" position.
2.By operating the tripmeter reset button, the warning period is displayed on the odometer.
3.Press the tripmeter reset button once for 1.2 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the tripmeter reset button once for less than 1.2 seconds.
6.The service reminder indicator is turned ON, and "CLEAR" is displayed on the odometer display for 3 seconds.
7.After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

HOW TO SET THE SCHEDULE


1.Turn the ignition switch to the "OFF" position.
2.By operating the tripmeter reset button, the warning period is displayed on the odometer.
3.Press the tripmeter reset button once for 1.2 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the tripmeter reset button for 1.2 seconds or longer and 3 times consecutively.
6.The service reminder indicator is turned ON, and the current schedule is displayed on the odometer display.
7.While the current schedule is displayed, press the tripmeter reset button for less than 1.2 seconds and 3 times consecutively.
8.The odometer display is shifted to the schedule selection mode.

9.When the tripmeter reset button is pressed for less than 1.2 seconds, the schedule is shifted, and when the button is pressed for 1.2 seconds or longer, the displayed schedule is set.
note For schedule, "JPN", "NAS", "GCC/EXP" and "MMAL" can also be selected. However, the setting shall be for "EU" only.
10.The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.


Schedule table
Schedule
Contents of schedule
EU 1 (initial condition)
Elapsed time (month)
Every 12 elapsed month
Driving distance (miles)
Every 9,000 miles of driving distance
Driving distance (km)
Every 15,000 km of driving distance
EU 2
Elapsed time (month)
Every 12 elapsed month
Driving distance (miles)
Every 12,000 miles of driving distance
Driving distance (km)
Every 20,000 km of driving distance
Optional INT
The optional schedule can be set. (Only M.U.T.-III can be set.)
OFF Display
Without function. "OFF" is displayed on the odometer/tripmeter.
Function OFF
Without function (Only M.U.T.-III can be set.)

HOW TO INACTIVATE THE SERVICE REMINDER FUNCTION


By setting to "OFF Display" or "Function OFF" when the schedule is set, the service reminder function can be inactivated.
When "OFF Display" is selected
When "Function OFF" is selected