|
|
1.Connect the M.U.T.-III to the diagnosis connector (For how to connect the M.U.T.-III, refer to GROUP 00 -
Diagnosis function  ).
|
|
|
2.Turn the ignition switch to the ON position.
|
|
|
3.Select the M.U.T.-III screen menu as follows.
(1)
Select "Meter" displayed on the "System selection" screen.
(2)
Select "Special function."
(3)
Select "Headlamp automatic levelling diagnosis."
|
|
|
4.On the multi information display in the combination meter, the headlamp automatic levelling warning is displayed. From the flashing of headlamp automatic levelling warning display, read the diagnosis code.
|
)
)