| caution | On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Diagnosis code No. |
Diagnostic item |
Reference page |
| 21 |
Height sensor abnormality (rear) |
|
| 22 |
Height sensor abnormality (front) |
|
| 23 |
Height sensor power supply line short to earth |
|
| 24 |
Pitch angle abnormality |
|
| 31 |
Malfunction of the levelling unit |
|