SPECIAL TOOLS


Tool
Number
Name
Use


MB990784
Ornament remover
Removal of front fog lamp bezel


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III measure adapter
  6. M.U.T.-III trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Diagnosis code, service data and actuator test check.


MB991223

  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222
Harness set

  1. Check harness
  2. LED harness
  3. LED harness adapter
  4. Probe
Continuity check and voltage measurement at harness wire or connector

  1. For checking connector pin contact pressure
  2. For checking power supply circuit
  3. For checking power supply circuit
  4. For connecting a locally sourced tester


MB992006
Extra fine probe
Continuity check and voltage measurement at harness wire or connector