|
1.
| caution |
Do not heat than necessary.
|
Immerse the refrigerant temperature sensor probe into engine oil to heat the sensor probe.
|
|
2.If the oil temperature reaches the standard value, there should be continuity between
the switch terminals.
Standard value:
|
|
Switch status
|
Operating temperature °C
|
Being turned off (No continuity)
|
155
|
Being turned on [Continuity exists (2 Ω
or less)]
|
125
|
|
| note |
When the oil temperature is 155°C or more and there is no continuity, the switch
will not be turned on [Continuity exists (2 Ω
or less)]
until the
temperature reduces to 125°C or less.
|
|
)
)