DATA LIST REFERENCE TABLE



Item No.
Check items
Inspection status
The display contents under normal conditions
17
Engine speed
-
Displays correct engine speed.
19
Ambient temperature sensor
-
Ambient temperature is the same as M.U.T.-III displayed temperature
20
Air thermo sensor
-
Evaporator outlet temperature is the same as M.U.T.-III displayed temperature.
21
Interior temperature sensor
-
Interior temperature is the same as M.U.T.-III displayed temperature
23
Temperature setting

Displays air conditioner set temperature.
24
Engine coolant TEMP sensor
-
Engine coolant temperature is the same as M.U.T.-III displayed temperature.
26
Vehicle speed
-
Displays vehicle speed.
27
A/C Compressor drive request
Compressor ON
ON
Compressor OFF
OFF
28
Air conditioning switch
Air conditioner switch ON
ON
Air conditioner switch OFF
OFF
29
Refrigerant leak
-
Normal
34
Idel up request
-
Displays idle-up request signal.
45
In/out select damper poten (target)
-
Displays outside/inside air selection damper target position.
46
In/out select damp potentiometer
-
Displays outside/inside air selection damper position.
55
Air outlet c/o potentiometer
-
Displays air outlet changeover damper position.
56
Air outlet c/o potentio. (Target)
-
Displays air outlet changeover damper target position.
57
Low pressure
-
Normal
60
Rear defogger switch
Rear window defogger switch ON
ON
Rear window defogger switch OFF
OFF
61
Pressure sensor
-
Displays refrigerant pressure.
63
Air mix potentiometer
-
Displays the air mix damper position.
67
Photo sensor
-
Displays sunload.
68
Front blower fan
-
Displays blower motor condition.
69
Front blower fan (Target)
-
Displays blower motor target value.
73
Refrigerant pressure
-
Displays refrigerant pressure status.
74
Condenser fan
-
Displays condenser fan running condition.
76
Temp. set dial position
-
Displays the set temperature output value on the control panel.
77
A/C Panel type
-
Dial/Auto/RHD
78
Fan set dial position
-
Displays the air volume output value on the control panel.
79
Air outlet c/o set dial position
-
Displays output value to the air outlet changeover dial on the control panel.
80
Fan set dial operation flag
-
ON when the air volume adjusting dial is operated
81
A/C SW operation flag
-
ON when the air conditioner switch is operated
82
Temp. set dial operation flag
-
ON when the air conditioner switch is operated
83
Defogger flag
-
ON when the air outlet changeover dial is set to the DEF position.
84
In/out air c/o SW operation flag
-
ON when the inside air/outside air changeover switch is operated
87
Rear defogger SW operation flag
-
ON when the rear window switch is operated
88
Rear defogger SW lamp
-
Displays rear window switch indicator status.
89
A/C SW lamp
-
Displays air conditioner switch indicator status.
90
In/out air c/o SW lamp
-
Displays the status of the inside air/outside air changeover switch indicator.
91
A/C Compressor drive flag
-
ON when the compressor is activated.
92
Wiper operation flag
-
ON when the wiper is operated.
93
Ignition position information
-
Ignition switch position status
94
Power source voltage
-
Displays power supply voltage.
95
IOD fuse equipment flag
-
IOD fuse status