REMOVAL AND INSTALLATION



Removal steps


1.
 Purge hose


2.
 Purge hose


3.
 Purge hose


4.
 Vacuum hose assembly


5.
 Vacuum hose


6.
 Vacuum tank


7.
 Vacuum tank bracket


8.
 Solenoid valve


9.
 Solenoid valve


10.
 EGR pipe

>>D<<
 11.
 EGR pipe gasket

>>D<<
 12.
 EGR pipe gasket


13.
 Throttle body


14.
 Throttle body gasket


15.
 Boost sensor

>>C<<
 16.
 Throttle body stay


17.
 Engine hanger, right

>>B<<
 18.
 Air intake plenum stay, front

>>A<<
 19.
 Air intake plenum stay, rear


20.
 Air intake plenum


21.
 Air intake plenum gasket

INSTALLATION SERVICE POINT

>>A<< AIR INTAKE PLENUM STAY, REAR INSTALLATION

1.After temporarily tightening the rear air intake plenum stay with the installation bolts, check that the inlet manifold fastens securely to the cylinder head.
2.Tighten the rear air intake plenum stay to the specified torque.
Tightening torque: 20 ± 5 N·m

>>B<< AIR INTAKE PLENUM STAY, FRONT INSTALLATION

1.After temporarily tightening the front manifold plenum stay with the installation bolts, check that the inlet manifold fastens securely to the cylinder head.
2.Tighten the front manifold plenum stay to the specified torque.
Tightening torque: 20 ± 5 N·m

>>C<< THROTTLE BODY STAY INSTALLATION

1.After temporarily tightening the throttle body stay with the installation bolts, check that the throttle body fastens securely to the cylinder head.
2.Tighten the throttle body stay to the specified torque.
Tightening torque: 20 ± 5 N·m

>>D<< EGR PIPE GASKET INSTALLATION

Install the EGR pipe gasket so that the tab is positioned as shown in the illustration.