REMOVAL AND INSTALLATION <6B3>


caution
  • When the detonation sensor is replaced, initialise the learned value using M.U.T.-III (Refer to GROUP 00 - Precautions before Service, Initialisation Procedure for Learning Value in MPI Engine ).
  • Do not drop or hit the detonation sensor against other components. Internal damage may result, and the detonation sensor will need to be replaced.
Pre-removal and Post-installation Operation
  • Intake Manifold Removal and Installation (Refer to GROUP 15 - Intake Manifold <6B3> ).




Removal steps


1.
 Right bank detonation sensor


2.
 Left bank detonation sensor