DIAGNOSTIC PROCEDURE |
STEP 1. Check other diagnosis codes. |
Q.
Are other diagnosis codes set?
|
Go to the appropriate troubleshooting. |
|
Go to Step 2. |
|
STEP 2. Line pressure check |
Carry out "hydraulic test"(Refer to ). |
Q.
Is the check result normal?
|
Go to Step 3. |
|
Repair according to the hydraulic pressure diagnosis table. |
|
STEP 3. Symptom recheck after erasing diagnosis code |
Q.
Is the check result normal?
|
Intermittent malfunction |
|
Replace CVT-ECU. |
|