|
| caution |
Blow air gradually to remove the pistons. The pistons will rush out if a force of air
is applied suddenly.
|
Cover the caliper body outer side with a cloth or similar materials. Blow compressed air
through the brake hose installation area to remove the piston and piston boot.
|
|
1.
| caution |
Do not use a flat-tipped screwdriver or similar tool
to remove the piston seal. These may damage the inner side of the cylinder.
|
Remove the piston seal with your finger tip.
2.Clean the piston surface and cylinder inner face with alcohol or specified brake fluid.
Brake fluid: DOT3 or DOT4
|
)
)
)
)
)