| 1.
Disconnect the stop lamp switch harness connector.
|
| 2.
Check for continuity between the terminals of the switch.
| Measurement condition
| Terminal connector of tester
| Specified condition
| When brake pedal is depressed.
| 1 - 2 (for stoplight switch)
| Continuity (less than 2 Ω)
| 3 - 4 (for brake switch)
| Open circuit
| When brake pedal is not depressed.
| 1 - 2 (for stoplight switch)
| Open circuit
| 3 - 4 (for brake switch)
| Continuity (less than 2 Ω)
|
|
|
)