LOCATION OF SYNTHETIC-RESIN PARTS


The location and material of each of the principal synthetic-resin parts are shown below.

<SHORT WHEELBASE>





No.
 Part name
 Material
 Abbreviation of material
 Heat-resistant temperature (°C)
1
 Front fog lamp bezel <Vehicles with fog lamp>
 Acrylonitrile butadiene styrene
 ABS
 80 - 110
2
 Radiator grille
3
 Door mirror
4
 Roof rail front cover
5
 Roof rail centre cover
6
 Roof rail rear cover
7
 Rear deflector
8
 Door mirror outer cover
 Acrylonitrile styrene acrylate
 ASA (AAS)
 80
9
 Rear propeller shaft
 Ethylene propylene-Carbon fibre reinforced plastic
 EP-CFRP
 120
10
 Rear mud guard
 Ethylene vinyl acetate
 EVA
 60
11
 Front mud guard
12
 Headlamp
 Polycarbonate
 PC
 120
13
 Inside rear view mirror <Vehicles with automatic anti-dazzling mirror>
 Polycarbonate + Acrylonitrile butadiene styrene
 PC + ABS
 120 - 125
14
 Front door outside handle
 Polycarbonate + Polyethylene terephthalate
 PC + PET
 120
15
 Front splash shield
 Polyethylene
 PE
 100
16
 Delta cover inner
 Polypropylene
 PP
 80
17
 Inside rear view mirror <Vehicles without automatic anti-dazzling mirror>
18
 Quarter lower trim
19
 Back door upper trim
20
 Back door upper trim side
21
 Back door centre trim
22
 Back door lower trim
23
 Back door Scuff plate
24
 Cargo floor box
25
 Scuff plate
26
 Cowl side trim
27
 Front fog lamp hole cover <Vehicles without fog lamp>
 Rubber denatured polypropylene
 PP + E/P
 80
28
 Front bumper face
29
 Front bumper cover
30
 Front bumper grille
31
 Back door lower garnish
32
 Rear centre bumper
33
 Licence plate garnish
34
 Back door garnish
35
 Rear bumper step
36
 Rear bumper corner
37
 Rear over fender
38
 Side sill garnish
39
 Front door garnish
40
 Side step garnish
41
 Front over fender
42
 Instrument panel
 20% talc filled rubber denatured polypropylene
 PP + E/P - TD20
 110
43
 Front door trim
 Talc filled polypropylene (10%)
 PP-TD10
 110 - 120
44
 Front deck garnish
 Talc filled polypropylene (20%)
 PP-TD20
 120 - 130
45
 Front pillar trim
46
 Quarter upper trim
47
 Rear floor console
48
 Front floor console
49
 Side panel
50
 Front panel
51
 Roof drip moulding
 Polyvinyl chloride
 PVC
 80
52
 Splash guard
 Thermoplastic elastmer (Olefine)
 TPO (TEO)
 80 - 100

<LONG WHEELBASE>





No.
 Part name
 Material
 Abbreviation of material
 Heat-resistant temperature (°C)
1
 Front fog lamp bezel <Vehicles with fog lamp>
 Acrylonitrile butadiene styrene
 ABS
 80 - 110
2
 Radiator grille
3
 Door mirror
4
 Roof rail front cover
5
 Roof rail centre cover
6
 Roof rail rear cover
7
 Rear deflector
8
 Door mirror outer cover
 Acrylonitrile styrene acrylate
 ASA (AAS)
 80
9
 Rear propeller shaft
 Ethylene propylene-Carbon fibre reinforced plastic
 EP-CFRP
 120
10
 Rear mud guard
 Ethylene vinyl acetate
 EVA
 60
11
 Front mud guard
12
 Headlamp
 Polycarbonate
 PC
 120
13
 Inside rear view mirror <Vehicles with automatic anti-dazzling mirror>
 Polycarbonate + Acrylonitrile butadiene styrene
 PC + ABS
 120 - 125
14
 Rear door outside handle
 Polycarbonate + Polyethylene terephthalate
 PC + PET
 120
15
 Front door outside handle
16
 Front splash shield
 Polyethylene
 PE
 100
17
 Delta cover inner
 Polypropylene
 PP
 80
18
 Centre pillar lower trim
19
 Inside rear view mirror <Vehicles without automatic anti-dazzling mirror>
20
 Quarter lower trim
21
 Back door upper trim
22
 Back door upper trim side
23
 Back door centre trim
24
 Back door lower trim
25
 Back door Scuff plate
26
 Cargo floor box
27
 Rear scuff plate
28
 Front scuff plate
29
 Cowl side trim
30
 Front fog lamp hole cover <Vehicles without fog lamp>
 Rubber denatured polypropylene
 PP + E/P
 80
31
 Front bumper face
32
 Front bumper cover
33
 Front bumper grille
34
 Rear centre bumper
35
 Back door lower garnish
36
 Licence plate garnish
37
 Back door garnish
38
 Rear bumper step
39
 Rear bumper corner
40
 Rear over fender
41
 Rear door garnish
42
 Side sill garnish
43
 Front door garnish
44
 Side step garnish
45
 Front over fender
46
 Instrument panel
 20% talc filled rubber denatured polypropylene
 PP + E/P - TD20
 110
47
 Front door trim
 Talc filled polypropylene (10%)
 PP-TD10
 110 - 120
48
 Rear door trim
49
 Front deck garnish
 Talc filled polypropylene (20%)
 PP-TD20
 120 - 130
50
 Front pillar trim
51
 Centre pillar upper trim
52
 Quarter upper trim
53
 Rear floor console
54
 Front floor console
55
 Side panel
56
 Front panel
57
 Roof drip moulding
 Polyvinyl chloride
 PVC
 80
58
 Splash guard
 Thermoplastic elastmer (Olefine)
 TPO (TEO)
 80 - 100
note
  • If the material symbols designated by the ISO differ from the old symbols, both are given, with the old symboling enclosed in brackets.
    ISO: International Standardization Organization.
  • A slash (/) in the material symbol indicates that two different materials make two-layer construction. A plus sign (+) indicates that the two different materials mix each other.
  • The indicated heat-resistant temperature for parts which are composed of two or more types of material is the value for the material with the lowest heat-resistant temperature.
  • The material symbols for synthetic-resin parts are embossed on the parts in hidden places.