DISASSEMBLY AND REASSEMBLY



Disassembly steps


1.
 Drip rail assembly


2.
 Rear drip assembly


3.
 Sunshade slider assembly


4.
 Sunshade assembly
<<A>>
 >>B<<
 5.
 Shaft


6.
 Drip shoe


7.
 Lifter assembly


8.
 Drip link
<<A>>
 >>B<<
 9.
 Drive cable assembly
<<B>>
 >>A<<
 10.
 Deflector assembly
<<C>>
11.
 Deflector
<<C>>
12.
 Deflector link assembly


13.
 Set plate


14.
 Front cover


15.
 Drive unit assembly


16.
 Frame assembly

REMOVAL SERVICE POINTS

<<A>> SHAFT/DRIVE CABLE ASSEMBLY REMOVAL

Draw out the drive cable assembly as shown in the illustration, then remove the shaft and the drive cable assembly.

<<B>> DEFLECTOR ASSEMBLY REMOVAL

Pry out the deflector assembly using a flat-tip screwdriver as shown in the illustration.

<<C>> REMOVAL OF DEFLECTOR/DEFLECTOR LINK ASSEMBLY

Disconnect the deflector and the deflector panel using a flat-tip screwdriver as shown in the illustration.

INSTALLATION SERVICE POINTS

>>A<< DEFLECTOR ASSEMBLY INSTALLATION



Align the claw of deflector assembly with the ditch of frame assembly.

>>B<< SHAFT/DRIVE CABLE ASSEMBLY INSTALLATION




Install the shaft to the drive cable assembly from the outside of vehicle as shown in the illustration.