Terminal No.
|
Check item
|
Check conditions
|
Normal conditions
|
2
|
Sonar cancel switch output
|
- Ignition switch: "ON" position
- Sonar cancel switch input: "OFF"
|
System voltage
|
- Ignition switch: "ON" position
- Sonar cancel switch input: "ON"
|
1 V or less
|
3
|
Back sensor (RH)
|
- Ignition switch to "ON" position
- Sonar switch: ON
|
0V - Approximately 8V (40 kHz pulse signal, emitted approx.
every 125 ms)
|
4
|
Back sensor (LH)
|
- Ignition switch to "ON" position
- Sonar switch: ON
|
0V - Approximately 8V (40 kHz pulse signal, emitted approx.
every 125ms)
|
5
|
Corner sensor (rear: LH)
|
- Ignition switch to "ON" position
- Sonar switch: ON
|
0V - Approximately 8V (40kHz pulse signal, emitted approx.
every 125 ms)
|
6
|
Corner sensor (rear: RH)
|
- Ignition switch to "ON" position
- Sonar switch: ON
|
0V - Approximately 8V (40 kHz pulse signal, emitted approx.
every 125 ms)
|
11
|
Corner sensor OFF indicator lamp output
|
- Ignition switch: "ON" position
- Sonar cancel switch input: "OFF"
|
System voltage
|
- Ignition switch: "ON" position
- Sonar cancel switch input: "ON"
|
1 V or less
|
12
|
Sensor earth
|
Always
|
1 V or less
|
13
|
Power supply to the ignition switch (IG2)
|
Ignition switch: "ON" position
|
System voltage
|
17
|
- Inhibitor switch "R" (reverse) position
input <A/T>
- Back-up lamp switch "ON" position input <M/T>
|
- Ignition switch to "ON" position
- Shift the selector lever to any position other than "R" (reverse).
|
1 V or less
|
- Ignition switch to "ON" position
- Shift the selector lever to "R" (reverse) position.
|
System voltage
|
24
|
Earth
|
Always
|
1 V or less
|
)